BDMNG - 380963 SPRAY A DAY PLUS

  • MSDS: BDMNG
  • Manufacturer: U S PACKAGING CORP
  • Product Name: 380963 SPRAY A DAY PLUS
  • National Stock Number: 6520-00-241-3559
Product Identification

Product ID:380963 SPRAY A DAY PLUS
MSDS Date:01/01/1987
FSC:6520
NIIN:00-241-3559
MSDS Number: BDMNG

Responsible Party
U.S. PACKAGING CORPORATION
440 DENNISTON CT
WHEELING, IL 60090
US

Cage: 0A0K6

Contractor
U.S. PACKAGING CORPORATION
WHEELING, IL 60090 US

Telephone: (312) 459-5030

Cage: 0A0K6

Ingredients

ISOBUTANE/PROPANE MIXTURE

Fraction By Weight: 20%

ACGIH TLV: 1000 PPM

Hazards

Effects of Overexposure:EYE,SKIN & RESP TRACT IRRIT. NARCO.

First Aid

First Aid:INHAL:RMV TO FRESH AIR. IF NOT BRTHNG GIVE CPR; IF BRTHING
DIFF GIVE OXYGEN. EYE:IMMED FLUSH W/PLENTY OF WATER FOR 15 MINUTES.
GET MED ATTN. SKIN:WASH W/SOAP & WATER. RMV CONTAM CLTHG & SHOES.

Fire Fighting

Flash Point:N/R (AEROSOL)
Extinguishing Media:CO*2, FORM, DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:WHEN HEATED TO DECOMPOSITION,IT PRODUCES
IRRIT & TOXIC PRODUCTS. CAN MAY BURST ABOVE 130F.

Accidental Release

Spill Release Procedures:VENT AREA. ABSORB SPILL W/INERT MATERIAL. WASH
RESIDUE W/SOAP & WATER TO REDUCE SLIPPING HAZARD.

Handling

Handling and Storage Precautions:DO NOT PUNCTURE OR INCINERATE. DO NOT
EXPOSE TO HEAT OR STORE AT TEMPERATURES ABOVE 120F (50C). KEEP AWAY
FM OPEN FLAME.
Other Precautions:AVOID CONTAMINATION OF CIGARETTES OR OTHER TOBACCO
PRODUCTS. WASH HANDS BEFORE SMOKING OR EATING. AVOID BREATHING
VAPORS. DO NOT SPRAY INTO EYES.

Exposure Controls

Respiratory Protection:NIOSH APPROVED RESP FOR USE IN ENCLOSED AREA.
Ventilation:LOCAL EXHAUST RECOMMENDED TO REDUCE HIGH CONCENTRATIONS.
Protective Gloves:NONE
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:NONE
Supplemental Safety and Health
MSDS DATED 24 OCT '83

Chemical Properties

HCC:V3
Spec Gravity:1.36
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT YELLOW LIQUID, FAINT ETHEREAL ODOR
Percent Volatiles by Volume:79

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED
Stability Condition to Avoid:NONE SPECIFIED BY MFR. AVOID TEMP >130F
Hazardous Decomposition Products:NONE SPECIFIED

Disposal

Waste Disposal Methods:DO NOT INCINERATE PRESSURIZED CANS. DISPOSE
I/A/W ALL LOCAL,STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.